REOTEMP Instrument Corporation - 10656 Roselle Street - San Diego, CA 92121 - Phone: 858.784.0710 - Fax: 858.784.0720 - Email: Sales@reotemp.com
 
  REOTEMP Part # Search
Temperature and Pressure Instrumentation - measuring your world since 1965
Pressure Gauges Diaphragm Seals Pressure Transmitters Pressure Switches Sanitary Pressure Gauges Sanitary Pressure Transmitters Sanitary Pressure Switches Brewing Products
featured products

Unit Conversion

Temperature

0 Fahrenheit

[ ]

0 Celsius

[ ]

0 Kelvin

[ ]


Pressure

PSI

[ ]

Bar

[ ]

kPa

[ ]

Kg/cm2

[ ]

Atm

[ ]

Torr (mmHg)

[ ]

inH2O

[ ]

mmH2O

[ ]

inHg

[ ]

oz/in2

[ ]


Length

Inches

[ ]

Feet

[ ]

Millimeters

[ ]

Meters

[ ]
Home Pressure Products REOTEMP Annular Seals (Red Valve Brand) Series 48W

Series 48W - Full-Port Pressure Sensor

REO TEMP Series 48W Pressure Sensor isolates and protects instrumentation. The full-port design eliminates clogging, ensuring accurate pressure measurement under the most difficult conditions.
 

Catalog (pdf)

Features:

  • No wetted metal parts
  • No gaskets required
  • Non-clogging, protects instrumentation
  • Wafer style
     

 

Materials of Construction:

  • ANSI class 125/150
  • Body available in Carbon or Stainless Steel
  • Sleeve available in Pure Gum Rubber, Neoprene, Hypalon, Chlorobutyl, Buna-N, EPDM, and Viton


     
The Series 48W is a full-face sleeve style. This sensor is distinguished by an enlarged rubber sleeve that extends over the flanges of the unit. In this configuration, the elastomer sleeve is the only wetted part of the unit, allowing for greater chemical resistance and the use of less expensive flange metals.

The elastomer sleeve senses pressure 360 degrees around the inner circumference of the unit, overcoming problems like plugging and fouling of traditional diaphragm seals. Combinations of elastomers and sensing fluids provide an operating range of -20F to +400F. Standard units are rated at 300 psi operation pressure and 450 psi surge pressure. All areas exposed to the process media are elastomer covered. Depending on the type of media being handled, elastomers can be specified to offer the best combination of chemical and abrasion resistance characteristics. The elastomer sleeve extends to the full face of the flange, eliminationg the need for additional gaskets.
 

Copyright © 2010 by REOTEMP Instrument Corporation, All rights reserved.